
Add to Cart
Connecting Rod Type Press Air Spring Refer. To S-300-4 / S-240-2 / S-200-2 / S-160-2
S-300-4 / S-240-2 / S-200-2 / S-160-2 can fit for many kinds of Connecting Rod Type Press equipment.
S-300-4 / S-240-2 / S-200-2 / S-160-2 Connecting Rod Type Press air spring is divided into Double,four, Convolutions. Punch air spring air cushion made of natural rubber through a series of processes made of rubber bladder, used in the punch on the air spring manufacturing process than ordinary industrial air springs to be much more complex, so the cost will be Higher, the price is naturally much higher than the other. In the middle with stainless steel rims, S-240-2 / S-200-2 / S-160-2 two with one rim, S-300-4 four with three rims.
Detailed Parameter Table of S-300-4 / S-240-2 / S-200-2 / S-160-2:
GUOMAT NO. | Reference No. | Hight H(mm) | Commonly Maximum Stroke(mm) | The Largest Diameter When Compressed(mm) | ||
Design High(mm) | Maximum High(mm) | Minimum Height(mm) | ||||
F-300-4 | S-300-4 | 206 | 326 | 111 | ±80 | 360 |
F-240-2 | S-240-2 | 98 | 148 | 53 | ±40 | 300 |
F-200-2 | S-200-2 | 98 | 148 | 53 | ±35 | 260 |
F-160-2 | S-160-2 | 98 | 148 | 53 | ±35 | 220 |
GUOMAT NO. | Reference No. | Standard Height,Internal Pressure 0.49 M pa When The General Value | Using Maximum Internal Pressure (M pa) | Internal Pressure (M pa) | ||||
Effective Area (Cm2) | Volume(L) | Load (K n) | Dynamic Spring Parameters (N/Min) | Vibration Frequency (Hz) | ||||
F-300-4 | S-300-4 | 710 | 15.5 | 34.7 | 324 | 1.5 | 0.88 | 3.9-4.9 |
F-240-2 | S-240-2 | 450 | 4.4 | 22.2 | 520 | 2.4 | 0.88 | 2.9-3.9 |
F-200-2 | S-200-2 | 315 | 3.2 | 15.4 | 373 | 2.5 | 0.88 | 2.9-3.9 |
F-160-2 | S-160-2 | 200 | 2.1 | 9.8 | 255 | 2.5 | 0.88 | 2.9-3.9 |
Description about S-350-4 / S-200-3 / S-100-3 / S-90-3 used in Connecting rod type press equipment:
S-350-4 / S-200-3 / S-100-3 / S-90-3 can use in the most common mechanical press.This type of air spring can effectively reduce the vibration, is there a more human nature is to reduce the effect of noise, is our staff work in a relatively quiet environment, the punch press equipment as well as protect the laborer.
Connecting rod type press based on connecting rod drive mechanism, the characteristics of the connecting rod type press is the slider can be falling fast, slow processing, rapid rise, save time and cost, and the dead point near the output is very large.
Product detail photos Of S-300-4 / S-240-2 / S-200-2 / S-160-2