GUANGZHOU GUOMAT AIR SPRING CO. , LTD
Email:linda@662n.com Mob:+8613924100039(WhatsAPP) Wechat:airspringG Skype:guomat
Add to Cart
1S3013 Goodyear Rear Suspension Air Bags Air Spring For Motorcycle or Machine
Cross OEM:
GUOMAT Part Number:G3014
Goodyear Part Number.:1S3-013
Goodyear Part Number:1S3013
Goodyear Part Number:1S3 013
Contitech Part Number:SZ37-6
Contitech Part NumberSZ37 6
Contitech Part Number:SZ376
Firestone Part Number.:W02-358-3000
Firestone Part Number:W023583000
Firestone Part Number:W02 358 3000
Descripition and Specifications:
G.Weight: 0.6 KG
N.Weight: 0.265 KG
Goodyear#:1S3-013
PISTON NUMBER: ASC-06-7-017 / ASC067017 /ASC 06 7 017
Ripple type: sleeve
Automann Bellow#:
Firestone Part Number.:W02-358-3000
Goodyear Bellow#:
Contitech Bellow#:
Triangle Bellows#:
Base plate / Pison type:
Number of roof holes/studs: 1
Upper Plate OD : 3.2 (in.) / 81.28 MM
Top plate C to C diameter: N / A.
Bottom hole stud Qyt: 1
Base Plate OD: 2.40 (in.) / 60.96 MM
Base plate C to C diameter:
Backplane section#:
Backplane alignment: parallel
Bumper: no
bracket:
Minimum height: 1.5 inches ／38.1 MM
Maximum height: 3.6 inches ／91.44 MM
Extended Height : 3.60 (in.) / 91.44 MM
Detailed parameters:
| Vibration isolation - dynamic characteristic values | ||||||
| Design height H: recommended 2.37 inch | ||||||
| Pressure p [psi] | 40 | 60 | 80 | 100 | 120 | Vol.V [in.³] |
| Force (Load) [lbf] | 231 | 327 | 439 | 553 | 677 | 9 |
| Spring rate [lbf/in] | 174 | 241 | 312 | 378 | 442 | 9 |
| Natural frequency [Hz] | 2.8 | 2.7 | 2.7 | 2.6 | 2.6 | 9 |
| Pneumatic application - static characteristic values | ||||||
| Force F [lbf] | ||||||
| Pressure p [psi] | 40 | 60 | 80 | 100 | 120 | Vol.V [in.³] |
| Height H [inch] 3.00 | 2.2 | 3.1 | 4 | 4.8 | 5.7 | 12 |
| Height H [inch] 2.50 | 2.7 | 3.6 | 4.6 | 5.6 | 6.5 | 9.8 |
| Height H [inch] 2.00 | 3.1 | 4.1 | 5.1 | 6.2 | 7.3 | 7.3 |
| Height H [inch] 1.50 | 3.4 | 4.5 | 5.6 | 6.7 | 7.9 | 4.9 |
Application of 1S3-013 air spring :
1S3-013 Goodyear Sleeve Air Spring. Super-Cushion®AirSprings offers new high productivity and long life for your trucks, trailers and buses. Sleeve Air Springs provides continuous comfort and trouble-free service.
This air spring was originally designed to be used in the Harley-Davidson shock, the current amount is relatively large and Halley motor. But there are many customers used in the relatively small force on the small machinery and equipment, there are precision instruments. Many customers respond to its shock absorption effect is very good.We designed G3014 this airbag is completely replaceable the original one 1S3-013.
The sleeve air spring uses a flexible member without internal molded beads. The flexible member is attached to the end retainer by clamping material between the end retainer and the outer crimp ring, and then the outer crimp ring is forged to the appropriate diameter. Sleeve air springs are commonly used in the following applications:
Passenger car and truck spring
Isolator for truck cab suspension
Seat spring (cab spring) for trucks and buses
Actuators and isolators for industrial applications
