4982 N6 P01 Contitech Air Suspension Spring Heavy Truck Air Bag Shock Kits

4982 N6 P01 Contitech Air Suspension Spring Heavy Truck Air Bag Shock Kits

Product Description

Air Suspension is a type of automotive suspension that uses air springs instead of conventional steel springs.Computer operated vents on the air springs, suspension sensors, and an onboard air compressor allow the system to maintain ride height and vary the suspension's ride characteristics.

Contitech Part Number: 4982N6P01

Contitech Part Number: 4982 N6P01

Contitech Part Number: 4982 N6 P01

Contitech Part Number: 4982n6p01

Contitech Part Number: 4982 n6p01

Contitech Part Number: 4982 n6 p01

M12*1.5 40-----Nm
M16*1.5 50-----Nm
M18*2.0 270-----Nm

Contitech Truck Air Suspension Spring Assembly

How to Install Truck Rubber Air Springs

• First, press the upper end stop with the thumbs of both hands while pressing inward at four points, squeezing the middle of the airbag, and then down to about one hand's width.
• Place the compressed air spring between the piston and the top plate, being sure to place the pocket logo lettering up.
• Secure the lower port to the ring seat on the piston and the upper port to the ring seat under the top plate. During the entire installation process, protective measures must be taken to support the frame and axle to prevent the body from slipping and causing personal injury.
• Charge the air spring so that its top and bottom ports are precisely positioned between the top plate and piston. The interface slides quickly into place.
• Lower the vehicle and the air spring will automatically roll down the piston. Finally the installation is complete.

4982 N6 P01 Contitech Air Spring Real Pictures